AUDIOPHONY TI-300 – Amplificador 2 x 80w 4-8 ohms

252,89

Características Principales
Ti300
Volume and power output in stereo mode
• 8 Ohms 2 x 80 W RMS
• 4 Ohms minimum 2 x 150 W RMS
Volume and power output in mono-bridged mode
• 8 Ohms minimum 1 x 300 W RMS
• Signal-to-Noise ratio Lower than 90 dB
• Input sensitivity 4 dBu +/-2dB
Distortion
• At 1KHz and 1/2 max. power Lower than 0,1%
• Crosstalk at full power – 65 dB at 1 KHz
• Frequency response (4 Ohms / 1W) +0,5dB ; 20Hz-20KHz
• Input impedance Unbalanced: 15 KOhms / Balanced: 30 KOhms
• Clip level 0dB
• Cooling system Convection
Connectors
• Input Balanced XLR and Jack TRS + Unbalanced RCA
• Output Screw terminal + 4-pole Speakon®
Settings
• Front panel Power switch / Channels 1 and 2 settings
• Rear panel Mode selector
• Indicators Protect (red) / Clip (yellow) / Signal (green)
• Protections Short-circuit / Current limiter / DC offset / Thermal
• Power supply 100Vac/230Vac – 50/60Hz
• Dimensions 482 mm x 44 mm x 330 mm
• Net weight 4,3 Kg 4,7 Kg

SKU: 284 Categorías: ,
 

Descripción

AUDIOPHONY TI-300 – Amplificador 2 x 80w 4-8 ohms

Características Principales
Ti300
Volume and power output in stereo mode
• 8 Ohms 2 x 80 W RMS
• 4 Ohms minimum 2 x 150 W RMS
Volume and power output in mono-bridged mode
• 8 Ohms minimum 1 x 300 W RMS
• Signal-to-Noise ratio Lower than 90 dB
• Input sensitivity 4 dBu +/-2dB
Distortion
• At 1KHz and 1/2 max. power Lower than 0,1%
• Crosstalk at full power – 65 dB at 1 KHz
• Frequency response (4 Ohms / 1W) +0,5dB ; 20Hz-20KHz
• Input impedance Unbalanced: 15 KOhms / Balanced: 30 KOhms
• Clip level 0dB
• Cooling system Convection
Connectors
• Input Balanced XLR and Jack TRS + Unbalanced RCA
• Output Screw terminal + 4-pole Speakon®
Settings
• Front panel Power switch / Channels 1 and 2 settings
• Rear panel Mode selector
• Indicators Protect (red) / Clip (yellow) / Signal (green)
• Protections Short-circuit / Current limiter / DC offset / Thermal
• Power supply 100Vac/230Vac – 50/60Hz
• Dimensions 482 mm x 44 mm x 330 mm
• Net weight 4,3 Kg 4,7 Kg

Amplificador 2 x 80W 4-8 ohms. Amplificador de clase D. Amplificador muy ligero con limitador independiente en cada canal. Dispone de LED indicadores para visualizar el estado del amplificador. Cuenta con protección térmica contra corrientes continuas para cada canal. Compatible con montaje en rack.

PÁGINA OFICIAL: AUDIOPHONY

DOCUMENTOS ASOCIADOS

Ficha Técnica / Manual AUDIOPHONY TI-300

Información adicional

POTENCIA (W)

OHMIOS (OHM)

Nº VIAS